|
|
|
If you require a one-step, single-feed electronic system
that performs emhossing and/or infilling, mag stripe
and chip encoding, and optional topping, choose the
Maxima 821.
It
operates on-line via a serial cable to your host computer
or PC. Instantly available are 20 different data formats,
as needed for highly structured or complex issue programs.
Manual
mode operation is also easy, using the optional PC-like
keyboard for data input. Plus, you can add the Maxima
CoPrint to simultaneously print patient wrist bands,
or a hardcopy record of cards issued..
A
manual feed, totally electronic embossing system with
encoding and a tipping option. Entry level upgradeable
machine, aimed at smaller health care facilities, credit
unions, small banks, branches.
|
| Features
and Specifications: |
| Card
Handling: |
| Manual
feed: Single Point Access System Pre-encoded card feed
feature. Reject alarm notification. Card size ISO standard
CR-80; CR-50; CR-70. Card thickness from .015 to .035
mil. |
| Communication: |
| Communication
interface: Serial RS232 port. Protocols: Async, Xon-Xoff,
SMS, Pound-Pound, MultiEmbosser, Chip, built-in data analyzer.. |
| Software: |
| "CARD"
PC based application software available. Self diagnostic,
selectable automatic repeat card, card reading with full
post-processing of the same card, resettable and non-resettable
counters. |
| Physical
Dimensions and Weight: |
| Width
16.7"x Height 18.9"x Depth 7.8" Weight 77 lbs |
| Processing: |
| Drum
capacity: 60/80/105 characters, embossing and/or infill.
Embossing area: 12 line by 31 characters Type: Standard
Gothic, OCR 78, punctuation. |
| Memory
and Data: |
| Storable
formats: 20 Data format: 32 fields with name, fixed data,
counters, check digit control and/or generation. Format
downloading capability. |
| Electrical
Requirements: |
| 110V/60Hz-ZZOV/50Hz
Power consumption: 450 watt; (750 watt model 821T) |
| Environmental
Conditions: |
| Operating
Temperature: 50"F to 100"F Relative Humidity: 20% - 85%
non condensing. |
Questions
about CIM
Embosser's
or a specific application?
Call Us at 800-448-7324
or e-mail us: sales@plas-tech.com
|
